Electrical Panel Installation and Replacement in Orlando, Florida

The electrical panel, often called the breaker box, is where all the power in your home or business is divided into individual circuits and protected. When the panel is undersized, worn out or built on a design with a poor safety record, every circuit downstream is at risk. Fuse HVAC & Appliance Repair installs, replaces and upgrades main panels and sub-panels across Orlando and Central Florida, and we make sure the new panel is sized for the equipment you run today and the equipment you plan to add.

Panel work is part of our electrical services. Because we also install air conditioners, heat pumps and major appliances, we size panels with real loads in mind rather than guesses.

A panel does not have to fail completely to need replacement. The most common reasons Orlando homeowners and businesses call us are:

• Not enough capacity. Many older Florida homes still have 100A or 125A service. Adding a larger AC system, an EV charger, a pool heater or an electric range can push that service past its limit.
• No free spaces. When every slot is full, new circuits get added with tandem breakers or piggy-backed wires, which is not a safe long-term solution.
• Frequent trips or hot breakers. Breakers that trip under normal use or feel warm point to overloaded circuits, loose connections or worn bus bars.
• Rust and moisture. Florida humidity, outdoor panels and garage installations lead to corrosion on bus bars and breaker connections.
• Panels with known problems. Some older panel brands and models are frequently flagged by home inspectors and insurance companies. We can identify them and explain your options.
• Remodels and additions. A new kitchen, room addition or garage workshop is the right time to add a sub-panel or upgrade the main service.

A 200 amp service is the most common target for a modern home. It provides room for central air, electric cooking, a dryer, a water heater and an EV charger at the same time without constant load juggling. A typical upgrade includes:

1. A load calculation based on your actual appliances and HVAC equipment.
2. Coordination with the utility for disconnection and reconnection of service.
3. Replacement of the main panel, main breaker and, when required, the meter base and service entrance conductors.
4. Transfer and labeling of every existing circuit, with AFCI and GFCI protection where current code requires it.
5. Permit, inspection and final testing.

For some homes a full service upgrade is not necessary. If the service is adequate but the panel is full or damaged, a same-size replacement or a sub-panel can solve the problem for less.

Sub-panels are a smart way to bring power closer to where it is used. We install sub-panels for detached garages, workshops, pool equipment, home additions, outdoor kitchens and commercial tenant spaces. A sub-panel shortens long circuit runs, frees space in the main panel and makes future additions easier. We size the feeder, grounding and bonding to code so the sub-panel is safe and inspection-ready.

Restaurants, retail stores and offices often grow into their electrical service. New ovens, walk-in coolers, ice machines and rooftop HVAC units all need dedicated circuits. We add panels and circuits for commercial equipment, troubleshoot nuisance tripping that interrupts business, and coordinate work around opening hours. Our refrigeration and commercial HVAC teams can check the equipment side on the same visit.

• Inspection first. We open the panel, check torque on connections, look for heat damage, corrosion and double-tapped breakers, and measure load.
• Clear options. You get a written estimate that compares repair, replacement and upgrade where each makes sense.
• Upfront pricing. The price is agreed before work begins. We do not bill by the hour.
• Minimal downtime. Most residential panel replacements are completed in one day, with power restored the same day after inspection or utility reconnection.
• Clean finish. Circuits are labeled clearly so you can find the right breaker in the future.

• Keep at least three feet of clear space in front of the panel.
• Never replace a breaker with a larger size to stop it from tripping; the wire is sized for the original breaker.
• Test GFCI outlets monthly using the test button.
• After a hurricane or flooding, have the panel inspected before restoring power if water reached it.
• Schedule an inspection if the panel is more than 25 to 30 years old or if you are buying an older home.

How long does a panel replacement take?

Most residential panel replacements are completed in a single day. Service upgrades that involve the utility can take longer because the reconnection must be scheduled with them.

Do I need a permit to replace an electrical panel in Orlando?

Yes, panel replacements and service upgrades require a permit and inspection. We include this in the plan and tell you about it before work starts.

Will a new panel fix breakers that keep tripping?

Only if the panel or breaker is the cause. Tripping is often caused by an overloaded circuit or a failing appliance, so we diagnose the circuit before recommending replacement.

Can I add an EV charger without upgrading my panel?

Sometimes. A load calculation shows whether the existing service can support a charger or whether a load management device or upgrade is needed.

For panel upgrades, sub-panels and replacements in Orlando, call (321) 421-0807 or book online. Related services: circuit breaker replacement, rough wiring and solar panel installation.